Large Digit Timers
Large Timer Displays Data-Max Seven Segment LED Bar Displays
Up / Down Timers - Time UP Totalisers - Stop / Watch Timer - Days Timer
These Large Digital Timers offer 4 distinct models for measuring and displaying Time:
- as 'UP' or 'DOWN' Process Timers from a preset value,
- TOTAL TIME taken of an event or process as a TOTALISER,
- a Large Digit STOP WATCH to STOP or START an event or process,
- a long range TIMER DISPLAY over several days timing UP or Down from a preset.
All models except the Stop Watch Timer provide control signal outputs.
Large Digit Timers such as these are ideal for
- Measuring assembly line down time
- Controlling an event or process by Time alone
- Calculating a process efficiency
- Measuring time taken for line changeovers
- Measuring TAKT time ( see our Counters section )
- Measuring a Total event or process time
- Improving employee motivation
………anything that can be measured in relation to Time.
UP / DOWN Large Digit Timers
These Large Digit Timers will Time UP or DOWN from a thumbwheel preset value, which may be set remotely from the Timer via a hand held box or from thumbwheels on the actual case assembly. An output contact is provided as a standard feature at 'Time Out' to control a process via a SPCO 3A relay.
Remote Time Setting Box – Up / Down Timers only
Using serial interface, this feature allows the Time range to be entered remotely via a hand held box, which once set can be dis-connected until the Time range needs to be changed again. Only one remote box is required for any number of Timers on site.
Large Digital Up / Down Timer Display
Large Digit Time Totalisers
These Large Digit Timers time UP from zero as long as the start signal is made, which is a volt free momentary contact closure. Totalisers can be 2.5, 4 or 6 digit format and usually as Seconds, Minutes and Hours and combinations of these. Additional time bases are available such as Days, or for fast timing periods, tenths, hundredths and even thousandths of seconds. Digit sizes available are from 2.3” (58mm) to 18” (457mm).
An additional feature of the Totaliser is to provide a control output at a preset value which will activate at the preset value but will also allow the Totaliser to carry on Totalising until it is manually stopped or reaches its maximum range limit.
Start / Stop / Reset terminals are standard on the Totalisers which can also be remotely wired any distance from the Totaliser, such as a Control Panel outside the Totaliser location.
Large Digital Time Totaliser Display
Large Digit Stop Watch Timer
These Large Digit Stop Watch Timers have been developed to measure production time or downtime of a process on shift changeover or the production of a different product than previously made.
Large Digit Stop Watch Timer
They can be used as Production Displays when they display ACTUAL Time and TOTAL Time taken with separate resets so that TOTAL Time can accumulate while the ACTUAL time can be reset periodically.
Start / Stop / Reset facilities are standard which may be wired remotely any distance from the Stop Watch, such as a Control Panel outside the Stop Watch location.
No output is available on the Large Digit Stop Watch Timers.Large Digit DAYS Timers
These Timers will Time in 'Days:Hours:Minutes:Seconds' as Totalisers or as Preset Timers, indoor or outdoor. They can be supplied with the ability to provide outputs at certain points in the Timing period and they can be supplied in TIME UP or TIME DOWN mode from a preset.
Large Digit DAYS Timers
Standard Features and Options for all
Large Digit Timers / Totalisers / Stop Watch / Day Timers
- Start / Stop / Reset volt free contact inputs
- Remote wiring for Start / Stop / Reset
- Output Relay SPCO @ 3A ( not Stop Watch )
- RS-232, RS-422, RS-485 ASCII or MODBUS Inputs / Output options
- Selectable UP or Down Timing ( not Totalisers or Stop Watch )
- Number of digits available 2.5, 4, 6, on UP/DOWN Timers, 9 digits on Day Timers
- Number of digits available 4, 6, 8, on Totalisers and Stop Watch
- Time ranges available Hrs, Mins, Secs and combinations of the same
- Time ranges DAYS : HRS : MINS : SECS on Day Timers
- Power supply options 100-260Vac, 24Vac, 12Vdc, 24Vdc
- Enclosure options Indoor IP54 (NEMA 3, 3S, 13) or Outdoor IP65 (NEMA 4, 4X)
- Accuracy via Quartz Crystal of 0.01%
- Environmental operating conditions
-10 ~ 50 C / 14 ~ 122 F
5 ~ 95% Humidity
Large Digit Timers / Totalisers / Stop Watch / Day Timers
Please consult our sales office to discuss your requirements and get a quotation
for our Large Digit Timers Displays
Tel: 941-795-4273 or Email: info@eagledigitaldisplays.com